Sony MHC-V44D - BLUETOOTH; Understanding BLUETOOTH technology; Pairing BLUETOOTH devices

32
GB
filename[D:\NORM'S JOB\SONY HA\SO150056\MHC-V44D (PMRF
01)\4584073121_GB\070TUN.fm]
masterpage:Left
model name [MHC-V44D]
[4-584-073-12(1)] GB
About the BLUETOOTH
wireless technology
BLUETOOTH wireless technology is a
short-range wireless technology that
enables wireless data communication
between digital devices. BLUETOOTH
wireless technology operates within a
range of about 10 meters.
Supported BLUETOOTH version,
profiles and codecs
For details, see “BLUETOOTH section”
(page 57).
Compatible BLUETOOTH devices
For details, see “Websites for
compatible devices” (page 10).
The BLUETOOTH indicator on the unit
lights up or flashes in blue to show the
BLUETOOTH status.
Pairing this system with
a BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with each
other beforehand. Once a pairing
operation is performed, it does not
need to be performed again.
1 Place the BLUETOOTH device
within 1 meter from the system.
2 Press BLUETOOTH on the unit to
select BLUETOOTH function.
“BT AUDIO” appears in the display
panel.
 When there is no pairing information
on the system, the system enters the
pairing mode automatically and
“PAIRING” flashes in the display
panel. Proceed to step 4.
 If the system is connected to a
BLUETOOTH device, press
BLUETOOTH on the unit to
disconnect the BLUETOOTH device.
3 Hold down PAIRING on the unit
for 2 seconds or more.
“PAIRING” flashes in the display
panel.
4 Perform the pairing procedure on
the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5 Select “MHC-V44D” on the
device’s display.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 1.
BLUETOOTH
About the BLUETOOTH
indicator
System status Indicator status
BLUETOOTH standby Flashes slowly
BLUETOOTH pairing Flashes quickly
BLUETOOTH connection
is established
Lights up
Notes