Sony MHC-V6D - Page 63

63
GB
MHC-V6D.GB.4-537-583-11(1)
Additional Information
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1 Unplug the AC power cord, and
then plug it back in.
2 Press  to turn on the system.
3 Hold down  and BASS BAZUCA
at the same time for about 3
seconds.
“RESET” appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Returning the “SETUP” settings
to the default
You can return the “SETUP” settings
(except for “PARENTAL CONTROL”
settings) to the default settings.
1 Hold down SHIFT, then press
SETUP.
2 Press

/

repeatedly to select
[SYSTEM SETUP], then press .
3 Press

/

repeatedly to select
[RESET], then press .
4 Press

/

repeatedly to select
[YES], then press .
It takes a few seconds to complete.
Do not press  while resetting the
system.
Party Chain
Party Chain function cannot be
activated.

Check the connections
(page50).

Make sure the audio cords are
connected correctly.

Adjust the volume.
There is no sound when you select
the audio in function.

Adjust the volume on the
connected equipment.

Try turning off the system, then
turning it back on again.
“PARTY CHAIN” is flashing on the
display.

The audio in function is selected
in the Party Chain function. Press
FUNCTION repeatedly to select
other function.

Try turning off the system, then
turning it back on again.