MHC-V6D.GB.4-537-583-11(1)
62
GB
BLUETOOTH device
Pairing cannot be performed.
Move the BLUETOOTH device
closer to the system.
Pairing may not be possible if
other BLUETOOTH devices are
present around the system.
In this case, turn off the other
BLUETOOTH devices.
Make sure to enter the correct
passkey when selecting the model
number (this system) on the
BLUETOOTH device.
Connection is not possible.
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
Enable the BLUETOOTH function of
the BLUETOOTH device.
Establish a connection from the
BLUETOOTH device.
The pairing registration
information has been erased.
Perform the pairing operation
again.
Erase the pairing registration
information of the BLUETOOTH
device (page45) and perform
the pairing operation again
(page42).
The sound skips or fluctuates, or
the connection is lost.
The system and the BLUETOOTH
device are too far apart.
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using VOL +/–.
There is severe hum, noise or
distorted sound.
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
Turn down the volume of the
connected BLUETOOTH device.