27
a) Button name when setting in the Setup menu. When the display differs
from that on the cross-point pad, the button name shown in parentheses
( ) is displayed.
b) Disabled in key bus mode.
c) Disabled in key/AUX bus delegation mode.
d) 3rd row and 4th row disabled in key bus mode.
e) 1st row disabled in key/AUX bus delegation mode.
f) 1st row and 2nd row disabled in key/AUX bus delegation mode.
g) 1st row and 2nd row disabled in key bus mode and key/AUX bus
delegation mode.
h) Disabled in free assign mode.
Free assign mode
Setting free assign mode in the Setup menu allows you to
use the 1st row to 4th row as cross-point button rows.
For details, see “Setting the Operation Mode of the Cross-
Point Control Block Button Rows” (page 434).
XPTHLD A
XPTHLD B
Sets cross-point hold for the
background A or B bus.
XPTHLD KEY1 to
XPTHLD KEY8
Sets cross-point hold key 1 to 8
buses.
XPTHLD UTIL1
XPTHLD UTIL2
(XPTHLD UTL1,
XPTHLD UTL2)
Sets cross-point hold for the utility 1
and 2 buses.
XPTHLD DME EXT Sets cross-point hold for the DME
external video bus.
XPTHLD DME UTIL1
XPTHLD DME UTIL2
(XPTHLD DME UTL1,
XPTHLD DME UTL2)
Sets cross-point hold for the DME
utility 1 and 2 buses.
ROW-n XPTHLD
e)
(XPT HOLD)
Sets cross-point hold for the buses
assigned to the 1st row to 4th row.
n = 1 to 4
ROW-n P/P OUT1
e)
ROW-n M/E-1 OUT1 to
ROW-n M/E-5 OUT1
e)
(XXX)
Loads images (OUT1) from the
PGM/PST and M/E-1 to M/E-5
banks into the 1st row to 4th row
(re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT1,
M/E-1 OUT1 to M/E-5 OUT1
ROW-n P/P OUT6
e)
ROW-n M/E-1 OUT6 to
ROW-n M/E-5 OUT6
e)
(XXX)
Loads images (OUT6) from the
PGM/PST and M/E-1 to M/E-5
banks into the 1st row to 4th row
(re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT6,
M/E-1 OUT6 to M/E-5 OUT6
ROWn TABLE MAIN
f)
Assigns the main cross-point
assign table to the 1st row to 4th
row.
n = 1 to 4
ROWn TBL: 1 to 14
f)
Assigns cross-point assign tables
1 to 14 to the 1st row to 4th row.
n = 1 to 4
ROWn BANK TABLE
f)
Assigns cross-point assign tables
configured on a switcher bank to
the 1st row to 4th row.
n = 1 to 4
ROW3&4 TABLE
MAIN
Assigns the main cross-point
assign table to the 3rd row and 4th
row.
ROW3&4 TBL: 1 to 14 Assigns cross-point assign tables
1 to 14 to the 3rd row and 4th row.
ROW3&4 BANK
TABLE
Assigns cross-point assign tables
configured on a switcher bank to
the 3rd row and 4th row.
ROWALL TABLE
MAIN
f)
Assigns the main cross-point
assign table to all rows.
ROWALL TBL:
1 to 14
f)
Assigns cross-point assign tables
1 to 14 to all rows.
ROWALL BANK
TABLE
f)
Assigns cross-point assign tables
configured on a switcher bank to all
rows.
Button name
a)
Description
ROW-n IMAGE
g)
(IMAGE)
Sets the image effect on
background A bus or B bus on the
1st row to 4th row.
n = 1 to 4
UTIL
c) h)
Assigns the specified bus to the 1st
row to 4th row in utility bus mode.
SHIFT ALL
e)
Switches the cross-point button
rows on all buses to the shifted
state.
XPTPAD COPY Copies the cross-point pad settings.
ROW-n AUX MIX
b) c)
(AUX MIX)
Executes an AUX mix transition
when an AUX bus is selected on
the 1st row to 4th row.
n = 1 to 4
AUX MIX
b) h)
Executes an AUX mix transition
when the AUX bus is selected.
ROW-n KEY
b) c)
(KEY)
Selects the signal on the key side in
the 1st row to 4th row.
n = 1 to 4
KEY
b) h)
Selects the signal on the key side in
the 2nd row.
XPT INHBT SET Sets/releases inhibit mode for
cross-point buttons.
XPT INHBT ALLCLR Releases inhibit mode for all cross-
point buttons.
DUAL BKGD BUS
h)
Toggles dual background bus
mode.
ROW-n PROT
e)
Inhibits button operation on the 1st
row to 4th row.
n = 1 to 4
MACRO TAKE
(TAKE)
Executes a macro take operation.
Macro Status
(EVENT XX/XX)
Displays the macro status.
XX/XX = executed event number /
total number of events
Macro: XXX
(XXX)
Recalls a macro register (1 to 250).
XXX = macro register name (up to
8 characters)
Button name
a)
Description
To Next Page
Loading...
