186
Copy and Swap
Overview
You can copy or swap the settings between switcher banks
or between keyers.
The following settings can be copied or swapped.
• Settings for the M/E banks and PGM/PST bank
• Keyer settings
• Wipe settings
• Independent key wipe settings
• DME wipe settings
• Independent key DME wipe settings
• Matte color settings (color 1, color 2, and how to
compose them)
• Color settings
• DME channel settings
You can also copy settings using simple button operations
(see page 187).
For details about copying a cross-point pad, see “Copying
Cross-Point Pad Settings” (page 436).
M/E copy and M/E swap
You can copy and swap all bank settings between the
M/E-1 and PGM/PST banks.
If a DME is being used on the copy source M/E bank, then
if for example there are insufficient DME channels, it may
not be possible to select the DME.
There are no such restrictions on a swap.
Keyer copy and keyer swap
You can copy and swap the key settings between keyers.
If a DME is being used on the copy source keyer, swap
source keyer, or swap destination keyer, then if for
example there are insufficient DME channels, or the limit
on using DME channels within an M/E bank is exceeded,
it may not be possible to select the DME.
Wipe copy and wipe swap
You can copy and swap wipe settings between banks.
Wipe copy and wipe swap for independent
key transitions
You can copy and swap wipe settings between keyers.
DME wipe copy and DME wipe swap
You can copy and swap DME wipe settings between
banks.
DME wipe copy and DME wipe swap for
independent key transitions
You can copy and swap DME wipe settings between
keyers.
Target bank Target data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
Bank settings, excluding the following
data items.
• Setup data
• Wipe snapshots
• DME wipe snapshots
• Snapshots
• Keyframe effects
• Key snapshots
• Key memory
Note
Target bank Target keyer Ta rget data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
Key 1 to key 8 Key settings,
excluding the
following data items.
• Setup data
• Key snapshots
• Key memory
Note
Target bank Target data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
Wipe settings.
However, It is not possible to copy or
swap between independent key transition
wipes.
Target bank Target keyer Targ et data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
Key 1 to key 8 Wipe settings for
independent key
transitions.
Target bank Target data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
DME wipe settings.
However, it is not possible to copy or
swap between independent key transition
DME wipes.
Target bank Target keyer Targ et data
M/E-1
M/E-2
M/E-3
M/E-4
M/E-5
PGM/PST
Key 1 to key 8 DME wipe settings for
independent key
transitions.
To Next Page
Loading...
