370
Executing a menu macro in the shortcut
menu
1
Open the Home >Favorites >Shortcut menu (0021).
2
Press the group name button.
3
Press the button to which the menu macro is assigned.
To stop execution of a menu macro
Press [MenuMacro Stop].
Creating and Editing a Menu Macro
You can create and edit a menu macro using the Menu
Macro Edit menu.
To display the Menu Macro Edit menu
Select a menu macro register in the following menus, and
press [Menu Macro Edit].
• Macro >Menu Macro Register >Recall & Run menu
(5431)
• Macro >Menu Macro Register >Lock menu (5432)
• Macro >Menu Macro Register >Delete menu (5436)
• Macro >Menu Macro Register >Rename menu (5437)
• File >Shotbox, Macro >Menu Macro >File Edit menu
(7144.1)
The Menu Macro Edit menu (7144.2) appears. The
selected register is recalled, and menu macro editing mode
is invoked.
Recalling a menu macro register and executing a menu
macro are not supported in menu macro editing mode.
To scroll the events display in the menu macro
register creation list
You can scroll the “Data” field display for an event
horizontally to check the content.
Select the target event, and then scroll the display using the
[H Scroll] parameter.
Creating a new menu macro
1
Select an empty menu macro register and display the
Menu Macro Edit menu (7144.2).
For details about the method of operation, see “To
display the Menu Macro Edit menu” (page 370).
2
If required, press [Auto Insert] to enable/disable auto
insert mode.
3
Create an event (carry out the menu operation you
want to register as an event in the menu macro).
For details about menus that can be registered, see
“Menu macro events” (page 368).
When auto insert mode is enabled, the event is
registered automatically.
When auto insert mode is disabled, press [Insert
Before] or [Insert After] to register the event.
4
Repeat steps 2 and 3 to register the required events in
the menu macro.
Note
Menu macro register number
Event number
Menu macro register name
Remaining Memory
Menu macro register
creation list
Menu macro creation
event list
To Next Page
Loading...
