ICP-X7000
1 (P)
ICP-X7000 (SY)
ICP-X7000 (CN)
MKS-X7011 (SY) Serial No. 10001 and Higher
MKS-X7017 (SY) Serial No. 10001 and Higher
MKS-X7018 (SY) Serial No. 10001 and Higher
MKS-X7019 (SY) Serial No. 10001 and Higher
MKS-X7020 (SY) Serial No. 10001 and Higher
MKS-X7021 (SY) Serial No. 10001 and Higher
MKS-X7023 (SY) Serial No. 10001 and Higher
MKS-X7024 (SY) Serial No. 10001 and Higher
MKS-X7026 (SY) Serial No. 10001 and Higher
MKS-X7031TB (SY) Serial No. 10001 and Higher
MKS-X7032 (SY) Serial No. 10001 and Higher
MKS-X7033 (SY) Serial No. 10001 and Higher
MKS-X7035 (SY) Serial No. 10001 and Higher
MKS-X7075 (SY) Serial No. 10001 and Higher
MKS-X2700 (SY) Serial No. 10001 and Higher
MKS-X2700 (CN) Serial No. 50001 and Higher
MKS-X7700 (SY) Serial No. 10001 and Higher
MKS-X7700 (CN) Serial No. 50001 and Higher
MKS-X7701 (SY) Serial No. 10001 and Higher
MKS-X7702 (SY) Serial No. 10001 and Higher
MKS-X7040 (WW) Serial No. 10001 and Higher
MKS-X7041 (WW) Serial No. 10001 and Higher
MKS-X7042 (WW) Serial No. 10001 and Higher
PWS-100SC1 (SY) Serial No. 140001 and Higher
PWS-100SC1 (CN) Serial No. 540001 and Higher
PWS-110SC1 (SY) Serial No. 110001 and Higher
PWS-110SC1 (CN) Serial No. 510001 and Higher
For MKS-X2700/MKS-X7700/PWS-100SC1/PWS-
110SC1
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is supplied
power from an outlet on the rack, please make sure
that the rack does not overload the supply circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please
make sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifications of the Operation Manual
.
To Next Page
Loading...
