Sony MVS-6530 - Input;Output Signals of Connectors

1-10 (E)
MVS-6520
1-7. Input/Output Signals of Connectors
Input and output signals of the connectors on the rear panel
are as follows.
n
<DEVICE> indicates a controlled device.
GPI: (D-sub 25-pin, female)
INPUT x 6, TTL
(resistive load)
OUTPUT x 4, open collector, 30 V rated voltage
Pin No. Signal Name Function
1 GND Ground
2 GPI IN 2 General-purpose input
3 GPI IN 4 General-purpose input
4 GPI IN 6
5 GPI OUT 2 General-purpose open collector
6 GPI OUT 4 output (*1)
7 GPI OUT 6
8 GPI OUT 8
9 GPI OUT 10
10 GPI OUT 12
11 GPI OUT 14
12 GPI OUT 16
13 GPI OUT COM Ground for open collector output
14 GPI IN 1 General-purpose input
15 GPI IN 3 General-purpose input
16 GPI IN 5
17 GPI OUT 1 General-purpose open collector
18 GPI OUT 3 output (*1)
19 GPI OUT 5
20 GPI OUT 7
21 GPI OUT 9
22 GPI OUT 11
23 GPI OUT 13
24 GPI OUT 15
25 GPI OUT COM Ground for open collector output
(*1): <Open collector output>
1
13
14
25
(External View)
(External View)
1
5
69
8
1
(External View)
+V
GPI OUT 1-16
GPI OUT COM
REMOTE S1, S2: RS-422A (D-sub 9-pin, female)
<DEVICE> (*2) from External Devices
Pin No. Signal Name Function
1 FG Frame ground
2 TX_ Transmitted data (_)
3 RX+ Received data (+)
4 GND Common ground
5 _ No Connection
6 GND Common ground
7 TX+ Transmitted data (+)
8 RX_ Received data (_)
9 _ No Connection
(*2): <DEVICE>: The controlling device.
MVS/UTIL (SW)
*3
/UTIL (SCU)
*3
/UTIL (FM)
*3
:
1000BASE-T, RJ-45 (8-pin)
Pin No. Signal Name Function
1 TRX1+ Transmitted/Received data (+)
2 TRX1_ Transmitted/Received data (_)
3 TRX2+ Transmitted/Received data (+)
4 TRX3+ Transmitted/Received data (+)
5 TRX3_ Transmitted/Received data (_)
6 TRX2_ Transmitted/Received data (_)
7 TRX4+ Transmitted/Received data (+)
8 TRX4_ Transmitted/Received data (_)
(*3): These connectors are currently not supported.