Navigation
Checking
the
GPS
status
About the GPS status indication
The GPS status can be checked by the color
of
the current position icon.
If
the current position is not displayed, touch VOICE/POS. to show the icon.
Current position icon
Indication
Signals are insufficient for navigation.
Reception temporarily interrupted (e.g., in a tunnel).
In the case
of
NV-U94T, the built-in sensor (POSITION plus)
calculates the current position instead.
Signals are sufficient for navigation.
Note
Acquisition
of
GPS signal may take up to 10 minutes, especially for the first time. Make sure that you are
in
an open space for faster acquisition.
Tip
If
GPS signal reception
is
poor
after turning on the unit, the information
bar
appears
at
the top
of
the
display.
You
can also check the GPS status by the message on the information bar.
By touching the information bar, you can jump
to
the display where you can view detailed GPS status
information (page
14).
continue to next page t
13
To Next Page
Loading...
Need help?
General
