Activating
the
Bluetooth
signal
1
In
the menu display,
touch.
iii!,
then "Bluetooth."
2 Select "Bluetooth Signal;' then "ON."
The signal is activated.
The Bluetooth indicator lights up in blue.
Pairing
with
a
cellphone
Pairing is required only the first time you connect
to
a cellphone.
To
pair this unit to a cellphone, you need to enter the same passkey* on this unit and on the
cellphone. The passkey can be either your own selected number or the number determined
by
the
cellphone.
For details, see the manual
of
the cellphone.
* Passkey
may
be cal/ed "passcode," "PIN code," "PIN number," "password," etc., depending
on
the
eel/phone.
Searching from this unit
The procedure to search for a cellphone from this unit
is
explained below.
Check that the cellphone
is
set to allow for searching (discoverable) beforehand.
1
In
the menu display, touch
......."
then "Bluetooth."
2
Select"
Add Devices."
A message asking you to set the cellphone to discoverable appears.
3 Select "OK."
After search
is
complete, the list
of
detected devices appears.
To
list devices by address, select "Address."
To
list by name, select "Name."*
* The address appears instead
of
the name
if
unavailable.
4 Select the cell
phone
to register.
Pairing starts.
5 Enter the passkey.
Perform the required operation also on the cellphone.
A message appears stating that the pairing is complete.
continue to next page
~
43
To Next Page
Loading...
Need help?
General
