Need help?Do you have a question about the Sony PlayStation VR CUH-ZVR2 and is the answer not in the manual?
General| Display Type | OLED |
|---|---|
| Resolution | 1920 x 1080 |
| Resolution Per Eye | 960 x 1080 |
| Field of View | Approximately 100 degrees |
| Connectivity | HDMI, USB |
| Sensors | Accelerometer, gyroscope |
| Weight | Approximately 600g (excluding cable) |
| Compatibility | PlayStation 4, PlayStation 5 |
| Refresh Rate | 90Hz, 120Hz |
| Audio | 3D audio |
| Cable Length | 4.5 m |
Lists the items included in the PlayStation VR package.
Connect stereo headphones to the VR headset for audio.
Ensure PS4 console and TV are turned off before connecting VR.
Connect the HDMI cable from the PS4 console to the processor unit.
Connect the PlayStation Camera to the PS4 console for tracking.
Connect the USB cable between the PS4 console and the processor unit.
Connect AC power cord to adapter and processor unit, then to wall socket.
Plug the VR headset cable into the processor unit.
Turn on the TV and then the PS4 console's power button.
Press the power button on the VR headset; tracking lights turn blue.
Follow on-screen instructions for PS VR setup and headset placement.
Use VR headset only within the defined Play Area for optimal experience.
Press release button, pull headband back to detach headset.
Press and hold the power button until a beep is heard; tracking lights turn off.
Visit rd.playstation.com/psvr/zvr2/ for latest info and tips.
Reset screen position by holding OPTIONS button or repositioning headset.
To Next Page
