Need help?Do you have a question about the Sony CUH-ZVR2 and is the answer not in the manual?
Connect the stereo headphones to your VR headset.
Unplug the HDMI cable from your PS4™ system and then plug it into the processor unit.
Connect your PlayStation®Camera to your PS4™ system.
Plug the USB cable (symbol) into your PS4™ system and the processor unit.
Connect the AC power cord to the AC adaptor, and then plug the adaptor cable (symbol) into the processor unit. Plug the power cord into an electricity supply.
Plug the VR headset (symbol) into the processor unit.
General| Product Name | PlayStation VR (CUH-ZVR2) |
|---|---|
| Display Type | OLED |
| Resolution | 1920 x RGB x 1080 (960 x RGB x 1080 per eye) |
| Refresh Rate | 120 Hz, 90 Hz |
| Field of View | Approximately 100 degrees |
| Connectivity | HDMI, USB |
| Compatibility | PlayStation 4, PlayStation 5 |
| Sensors | Six-axis motion sensing system (three-axis gyroscope, three-axis accelerometer) |
| Tracking | PlayStation Camera |
| Audio | Built-in microphone |
| Weight | Approximately 600g (without cables) |
To Next Page
