Sony PS-LX510 - User Manual

SERVICE MANUAL
SILVER MODEL SHOWN
US Model
Canadian Model
AEP Model
E Model
SPECIFICATIONS
Turntable
Platter 30 cm (12 in.}, aluminum-alloy diecast
Motor Linear torque BSL (brushless and slottess)
motor
Drive system Direct drive
Control system
Speed
Wow and flutter
Quartz lock servo control system
33/3 rpm, 45 rom
0.03% (WRMS)*, 0.035% (WRMS)
+0.045% (DIN)
Signal-to-noise ratio 75 dB (DIN-B)
Automatic system Lead-in, return, repeat, reject, up/down,
record size selection
Load characteristics 0% up to 1.5g tracking force
Speed deviation
(at lead-in groove of a record)
Within + 0.003%
Tonearm
Type
Linear tracking tonearm
Pivot-to-stylus length 75 mm (3 in.)
Tracking error +0.1°
Tracking force adjustment range +0.25g
Usable cartridge
plug-in type, 6g
General
Power requirements
120 V ac, 60 Hz (US, Canadian model)
220 V ac, 50/60 Hz (AEP model)
110 — 220 V, 120 — 240 V ac, 50/60 Hz
(E model)
Power consumption 10W
Dimensions
MICROFILM
Approx. 430 x 90 x 356 mm (w/h/d)
(1615/16 x 35/g x 14 in.)
including projecting parts and controls
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
A ON THE SCHEMATIC DIAGRAMS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
With the dust cover opened.
(161/, in.)
365mm
(143/, in.)
— Continued on page 2 —
ATTENTION AU COMPOSANT AYANT RAPPORT
A LA SECURITE!
LES COMPOSANTS IDENTIFIES PAR UNE TRAME ET
UNE MARQUE /\ SUR LES DIAGRAMMES SCHE-
MATIQUES ET LA LISTE DES PIECES SONT CRITIQUES
POUR LA SECURITE DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIECES
SONY DONT LES NUMEROS SONT DONNES DANS CE
MANUEL OU DANS LES SUPPLEMENTS PUBLIES PAR
SONY.
STEREO TURNTABLE SYSTEM
SONY.
AUD

Sony PS-LX510 Specifications

General

Type	Fully Automatic Turntable
Speeds	33 1/3 and 45 rpm
Platter	Aluminum Die-cast
Cartridge	Moving Magnet
Effective length	216.5 mm
Output level	2.5mV
Frequency response	20 Hz to 20 kHz
Weight	4.5 kg
Automation	Fully Automatic
Drive	Belt Drive
Motor	DC Motor
Tonearm	Static Balance
Power requirements	120V AC, 60 Hz