Need help?Do you have a question about the Sony PS-LX2C and is the answer not in the manual?
General| Drive System | Belt drive |
|---|---|
| Motor | DC motor |
| Output Voltage | 2.5mV |
| Signal-to-Noise Ratio | 65dB |
| Type | Belt Drive |
| Speed | 33, 45 rpm |
| Cartridge | Moving magnet |
| Frequency Response | 20Hz to 20kHz |
| Recommended Load Impedance | 47k ohms |
Guide for installing the cartridge and connecting lead wires.
Crucial step for accurate stylus tracking and proper tracking force.
Procedure to set the correct vertical force for stylus tracking.
Setting the anti-skating force to cancel tonearm inward movement.
Procedure to select speed, start playback, and adjust volume.
Step-by-step guide for installing a new stylus.
Common problems and their solutions for system issues.
To Next Page
