Sony PS-X6 Service Manual

AEP, UK, E model
PS-X6: AEP, UK, E model
Cartridge in only supplied with the
turntable system of E model.
SPECIFICATIONS
GENERAL Wow and Flutter:
Power Requirements: © 120V ac, 60 Hz (US, Canadian model)
110, 120, 220 or 240V ac, 50/60 Hz S/N Ratio:
(AEP, Ul, Emadell Initial Drift:
8W (US, Canadian model)
12W (AEP, UK, E model)
Approx. 445 (w) x 150 (h) x 375 (d) mm
17 Yy (w) x 5 V/s (h) x 14 94 (d) inches
including projecting parts and controls
Power Consumption:
Dimensions:
TONEARM
Load Characteristics:
Speed Deviation:
SONY-00830
US Model
Canaaian Model
AEP Model
UK Model
E Model
FULL AUTOMATIC
~ STEREO TURNTABLE SYSTEM
+ 0.045% (DIN)
0.025% {(WRMS)
73dB (DIN-B)
Within 0.0003 %
At 150g tracking force 0%
Within 0.003%
H ical i f pi
Weight:
US,
Canadian
model
Type
Statically
balances
universal
pivot
Approx.
10.3
kg,
22
1b
12
0z
(net)
Pivot
to
Stylus
Length:
216.5mm,
81/2
inches
Approx.
12.1kg,
261b
1102
(in
aes
Overall
Arm
Length:
300mm,
117%
inches
carton ’
AEP,
UK,
E
model
Overhang:
16.5mm,
2/32
inches
Approx. 10.9 kg, 24 tb (net) ing E : 43° ~1°
Approx. 12:7 kg, 28 ib (in shipping carton) TERRE SE1On ale
Tracking-force
TURNTABLE
as
Adjustment
Range:
0-39
Platter: 31.7cm (12% inches), Shell Weight: 10.59
aluminum-alioy. diecast Cartridge Weight Range: 2.5-9.59
Motor: DC servo-controlied motor 8-14.59
(brushless and slotless)
Direct drive, crystal lock contro! system
33 3 rpm, 45 rom
Comes to nominal speed within a third
revolution (33 1/3 rpm)
Drive System:
Speed:
Starting Characteristics:
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS !{DENTIFIED BY SHADING ON THE
SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE
CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
(with extra weight)
— Continued on page 2 —
ON
Y.
SERVICE MANUAL

Sony PS-X6 Specifications

General

Speeds	33 1/3 and 45 RPM
Overhang	15 mm
Tonearm	Static balance type
Cartridge weight range	4 to 10 g
Drive method	Belt-drive
Motor	DC servo motor