Need help?Do you have a question about the Sony PS-X60 and is the answer not in the manual?
General| Platter | Aluminum Die-Cast |
|---|---|
| Overhang | 15 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Speeds | 33, 45 rpm |
| Motor | DC Motor |
| Wow and Flutter | 0.025% WRMS |
| Signal-to-Noise Ratio | 70 dB |
| Power Requirements | 120 V, 60 Hz |
| Type | Belt Drive Turntable |
Lists various performance and physical specifications of the tonearm assembly.
Visual representation of the system's functional blocks and signal flow.
Procedures for connecting and installing the cartridge and its wiring.
Detailed steps for assembling the arm pipe and tonearm.
Procedures for performing mechanical adjustments on the unit.
Steps to calibrate the automatic return function.
Procedures for adjusting motor amplifier offset and hall device gain.
Procedures for setting turntable speed and head output level.
Detailed circuit diagram of the turntable system.
Diagrams showing the physical layout of components on circuit boards.
Diagram showing disassembled parts of the turntable (Section 1).
Diagram showing disassembled parts of the turntable (Section 2).
Diagram showing disassembled parts of the turntable (Section 3).
Diagram showing disassembled parts of the turntable (Section 4).
To Next Page
