Sony RM-E700 - Page 33

Locate the start point of the
tape to be recorded, using the
tape transport buttons and jog/
shuttle dial of the RECORDER
section, and set the recorder to
the recording pause mode.
Lights only in the case: :
of the Connection 1.
Press the VIDEO EDIT button.
The VIDEO EDIT indication lights and
the RM-E700 starts scene-by-scene
editing.
The
player
rewinds
the
tape
("voeo
cor}
Soo
SS
eos
——-—
about
15
seconds
before
the
IN
point
2
———
|
ky
and
starts
playback.
The
recorder
rn
eens
ri
starts
recording
from
the
IN
point.
Ua
3
iL
5.
Press the VIDEO EDIT button at
the end of the desired scene.
The VIDEO EDIT indication turns off.
The player continues playback for
about 2 seconds and enters the
playback pause mode. The recorder |
immediately enters the recording 70% pom
pause mode. HT 5 C, i rf.
The END MODE selector at the rear
does not work for scene-by-scene
editing.
(SPI)
Repeat from step 2 to 5.
To stop scene-by-scene editing
Press the VIDEO EDIT button again, or the ll STOP button
of the PLAYER section.
31