Sony RM-E700 - Page 8

Inserting the Lithium Batteries
This unit uses two lithium batteries to keep the data for
program editing, the data for timing adjustment, and the
stored remote control signal of other manufacturer's video
equipment.
The lithium battery compartment is located at the bottom.
. In step 4, make sure that the AC power adaptor is connected before turning on the power. Otherwise, .
How to insert the lithium battery will be consumed quickly.
Open the cover of the lithium
battery compartment.
Insert the supplied two
CR2025 lithium batteries with
correct polarity.
Close the cover.
Connect the supplied AC power adaptor to the DC IN 6V jack at the rear, and turn on the POWER
switch.
Check that the (XJ mark does not appear in the display window.