14
Advanced Remote Operations
The numeric codes corresponding to the
component and the make of the
component
Use the numeric codes in the tables below to control non-
Sony conponents and also Sony components that the
remote is normally unable to control. Since the remote
signal that a component accepts differs depending on the
model and year of the component, more than one numeric
code may be assigned to a component. If you fail to
program your remote using one of the codes, try using
other codes.
Notes
• The numeric codes are based on the latest information available
for each brand. There is a chance, however, that your
component will not respond to some or all of the codes.
• All of the functions on this remote may not be available when
used with your particular component.
To control a CD player
Make Code(s)
DENON 03, 04
JVC 05, 06, 07
KENWOOD 08, 09, 10
MAGNAVOX 11, 16
MARANTZ 16
ONKYO 12, 13, 14
PANASONIC 15
PHILIPS 16
PIONEER 17
SONY 01, 02
TECHNICS 15, 18, 19
YAMAHA 20, 21, 22
To control a DAT deck
Make Code(s)
PIONEER 02
SONY 01
To control an MD deck
Make Code(s)
DENON 02
JVC 03
KENWOOD 04
SONY 01
To control a tape deck
Make Code(s)
DENON 02
KENWOOD 03, 04
NAKAMICHI 05
PANASONIC 10
PHILIPS 06, 07
PIONEER 08
SONY 01
TECHNICS 09, 10
YAMAHA 11, 12
To control an LD player
Make Code(s)
PIONEER 05
SONY 01, 02, 03, 04
Operating Non-Sony Components
To Next Page
Loading...
