To Next PageTo Next Page
Need help?Do you have a question about the Sony RMT-V288 and is the answer not in the manual?
Configure language, channels, and clock automatically.
Set timer recordings using the Dial Timer function.
Simplify timer recordings using the ShowView system.
Set timer recordings for TV programmes.
Automatically record from external equipment with timer.
Locate recorded programmes using the Smart Search function.
Detailed schematic of the video signal path and processing.
Block diagram of the servo and system control circuitry.
Detailed schematic of the audio signal path and processing.
Block diagram of the VCR's power supply system.
Overall schematic showing board interconnections.
Detailed schematics and PWB layouts for all major boards.
Schematic for video and audio circuits on the MA-373 board.
Schematic for servo and system control on the MA-373 board.
Schematic for Hi-Fi audio circuits on the MA-373 board.
Schematic for the power supply section of the MA-373 board.
Pinout and function for IC162 video block interface signals.
Pinout and function for IC162 servo peripheral interface signals.
Pinout and function for IC162 mechanism block interface signals.
Pinout and function for IC162 system control peripheral interface signals.
Pinout and function for IC162 audio block interface signals.
Detailed pin function list for the main microprocessor IC162.
Explanation of error code display and a list of codes.
Procedures for electrical calibration.
Checking and adjusting power supply voltages.
Adjusting RF switching position for tape playback.
Adjusting audio levels, frequency response, and S/N.
General