[ID
VOL+/-
buttons
Use to adjust the volume. The illumination
indicator flashes when the volume level is
set to either minimum or maximum.
[§]NETWORK
STANDBY indicator
Lights up in amber when the unit is in the
network standby mode (page 13).
[l]
LINK indicator
Indicates the connection status
of
the
wired/wireless LAN.
Green: Wireless connection (page 14).
Amber: Wired connection (page 18).
Red: The following status have occurred.
- This unit cannot find the wireless
LAN access point.
- The security method/password
selected for the access point is wrong.
- An error has occurred.
Not lit: The wireless network setting
process is not finished.
QGB
To Next Page
