Need help?Do you have a question about the Sony SA-VA1 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | SA-VA1 |
| Impedance | 8 Ohms |
| Configuration | 5.1 |
| Total Power | 100W |
| Speaker Configuration | 5.1 |
| Subwoofer Included | Yes |
| Frequency Response | 20Hz - 20kHz |
| Dimensions | 200 x 950 x 270 mm |
| Dimensions (W x H x D) | 200 x 950 x 270 mm |
| Type | Home Theater Speaker System |
Essential warnings to prevent fire and electric shock hazards by avoiding rain or moisture.
Instructions for safe operation, including voltage, unplugging, and handling spills.
Highlights include enhanced theater mode, DBR woofer, multi-drive amplifier, easy connection and operation.
Explains how the system achieves high-quality center channel sound using front speakers.
Details the SAW design for reproducing powerful ultra-low frequencies with clarity.
Diagram and steps for connecting the SA-VA1 to a TV with fixed-volume audio output jacks.
Procedure for connecting the system to TVs that do not have fixed-volume audio output jacks.
Instructions for activating and selecting DOLBY PRO LOGIC modes, noting external speaker requirement.
Adjusting the volume of the center speaker in 1 dB steps for optimal balance.
Using the test tone to sequentially output sound from each speaker for level adjustment.
Detailed steps for using the test tone to achieve a balanced sound image.
Specifying four modes (NORMAL, WIDE, 3CH, PHANTOM) for external center speaker configurations.
Solutions for scenarios where no sound is heard from any or specific speakers.
To Next Page
