Sony SA-W11 - Specifications and Accessories

Additional Information
11
EN
Specifications
AUDIO POWER SPECIFICATIONS
(USA model only)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from 20 - 150 Hz;
rated 60 watts per channel minimum RMS power, with
no more than 0.8% total harmonic distortion from
250 milliwatts to rated output.
System
Type Active Sub Woofer (magnetically shielded design)
Speaker unit
Woofer: 16 cm dia. (6
3
/8 in.) × 1
Practical maximum output
40 W (6 ohms, DIN)
U.S.A.: 60 W
Other countries: 50 W (50 Hz)
Reproduction frequency range
28 Hz - 200 Hz
High frequency cut-off frequency
50 Hz - 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: Input pin jack
SPEAKER IN: Input terminals
General
Power consumption
U.S.A.: 35 W
Other countries: 45 W
Dimensions Approx. 205 × 380 × 395 mm (w/h/d)
(8
1
/8 × 15 × 15
5
/8 in.)
Mass 9.5 kg (20 lb 15 oz)
Supplied accessories
Audio connecting cord
(1 phono plug - 1 phono plug) (1)
Speaker cord (2)
Design and specifications are subject to change without
notice.
Where purchased Power requirements
U.S.A. and Canada 120 V AC, 60 Hz
Other countries 110 - 120/220 - 240 V AC adjustable,
50/60 Hz
China 220 - 240 V AC, 50/60 Hz