Sony SA-WD100 Service Manual

SA-WD100
US Model
Canadian Model
AEP Model
UK Model
E Model
Chinese Model
SERVICE MANUAL
ACTIVE SUBWOOFER
9-873-640-02
2002K1600-1
© 2002.11
Ver 1.1 2002. 11
SPECIFICATIONS
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohm loads, from 26 – 200 Hz; rated 250 watts,
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type
Active Subwoofer
Speaker unit
Woofer: 13.5 cm dia. (5
3
/
8
in.), cone type
Continuous RMS output
North American model (0.8%) : 200 W
European model (DIN) : 200 W
Other models (0.8%) : 200 W
Reproduction frequency range
26 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals (ELP plug 6P)
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
North American model : 120 V AC, 60 Hz
European model : 220 - 240 V AC, 50/60 Hz
Other models : 220 - 240 V AC, 50/60 Hz
Power consumption
North American model : 50 W
Other models : 50 W
1 W (Standby mode)
Dimensions
Approx. 165 × 325 × 425 mm
(w/h/d) (6
1
/
2
× 12
7
/
8
× 16
3
/
4
in.)
Mass
10 kg (22 lb 1 oz)
Supplied accessories
Audio connecting cord
(1 phono plug – 1 phono plug) (1)
Speaker cords (1)
Design and specifications are subject to change without
notice.

Sony SA-WD100 Specifications

Audio Specifications

digital amplifier power	200 Watts
frequency response	26-200 Hz
woofer excursion	Over 1 inch
woofer size	5.25 inches

Weight and Dimensions

dimensions	6.4 inches x 12.7 inches x 16.7 inches
weight	22 lbs