SA-WX700
SERVICE MANUAL
SPECIFICATIONS
US Model
Canadian Model
AEP Model
UK Model
9-877-137-03
2004E02-1
© 2004.05
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
ACTIVE SUBWOOFER
Ver 1.2 2004.05
AUDIO POWER SPECIFICATIONS
For the U.S.A. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohm loads, from 20 – 200 Hz; rated 200 watts, minimum RMS
power, with no more than 0.8 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer, magnetically shielded (closed cabinet)
Speaker units
Woofer : 25 cm dia. (10 in.), cone type x 2
Continuous RMS output
North American model
(3 ohms/100Hz, 0.8%) : 250 W
European model (DIN 3 ohms/100Hz, 0.7%) : 250 W
RMS output
Other models (3 ohms/100Hz, 10%) : 350 W
Reproduction frequency range
20 Hz - 200 Hz
High frequency cut-off frequency
50 Hz - 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
US, Canadian models : 120 V AC, 60 Hz
AEP model : 230 - 240 V AC, 50/60 Hz
UK model : 230 - 240 V AC, 50/60 Hz
Power consumption
70 W
less than 0.5 W (Standby mode)
Dimensions
Approx. 390 x 490 x 480 mm
(15
3
/
8
x 19
3
/
8
x 19 in.) (w/h/d)
Mass
24 kg (52lb 15oz)
Supplied accessories
Audio connecting cord
(1 phono plug - 1 phono plug) (1)
Speaker cords (2)
Design and specifications are subject to change without notice.
To Next Page
Need help?
General
