EasyManua.ls Logo

Sony SA-WSF500 User Manual

Sony SA-WSF500
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
SA-WSF200/WSF500/
SS-CTF500/F500/TSF200/TSF500
SPECIFICATIONS
SA-WSF200/WSF500
ACTIVE SUBWOOFER
SS-CTF500/TSF200/TSF500
SPEAKER SYSTEM
9-889-149-02
2008H05-1
©
2008.08
Canadian Model
E Model
Australian Model
Russian Model
SA-WSF500/SS-CTF500/F500/TSF500
AEP Model
UK Model
SA-WSF200/SS-TSF200
Singapore Model
Thai Model
SA-WSF200/WSF500/
SS-CTF500/F500/TSF200/TSF500
Ver. 1.1 2008.08
Photo: SA-WSF500
Photo: SS-CTF500
Photo: SS-TSF200
Photo: SS-TSF500
SA-WFS200 is the active subwoofer in DAV-F200.
SA-WFS500 is the active subwoofer in DAV-F500.
SS-CTF500 is the center speaker in DAV-F500.
SS-TSF200 is the front speaker in DAV-F200.
SS-TSF500 is the front and Surround speaker in DAV-F500.
SS-F500 is composed of four SS-TSF500, one SS-CTF500, four Speaker stands and Wall mounting brackets. (for DAV-F500)
Note:
When SA-WSF200 is checked, it is necessary to connect it with HCD-F200.
When SA-WSF500 is checked, it is necessary to connect it with HCD-F500.
Speakers
Front speaker (SS-TSF200)
Speaker system 2-Way 2-Driver speaker
system Bass reflex,
Magnetically Shielded
Speaker unit Woofer: 65 mm cone type
Tweeter: 40 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 95 mm × 185 mm × 80mm
(w/h/d)
95 mm × 215 mm × 105
mm (w/h/d) with stand
Mass (approx.) 0.85 kg
0.9 kg with stand
Subwoofer (SA-WSF200)
Power requirements:
Power consumption On: 105 W
Standby: 0.3 W (at the
Power Saving mode)
Speaker system Subwoofer Bass reflex
Speaker unit 160 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 205 mm × 460 mm × 475
mm (w/h/d)
Mass (approx.) 13 kg
Speakers
Front and Surround speaker (SS-TSF500)
Speaker system 2-Way 3-Driver speaker
system Bass reflex,
Magnetically Shielded
Speaker unit Woofer: 65 mm cone type
×2
Tweeter: 50 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 95 mm × 635 mm × 80 mm
(w/h/d)
305 mm ×1,205 mm × 305
mm (w/h/d) with stand
Mass (approx.) 1.8 kg
5.3 kg with stand
Center speaker (SS-CTF500)
Speaker system Full range, Magnetically
Shielded
Speaker unit 30 mm × 50 mm cone type
Rated impedance 3 ohms
Dimensions (approx.) 381 mm × 48 mm × 62mm
(w/h/d)
Mass (approx.) 0.5 kg
Amplifier Section
Power output (rated)
RMS output power (reference)
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
FL/FR/C*: 141 W
(per channel at 3 ohms,
1 kHz, 10% THD)
Subwoofer*: 141 W (at 3
ohms, 80 Hz, 10% THD)
* Depending on the decoding mode settings and the
source, there may be no sound output.
Thai model: 220 V AC, 50/60 Hz
Other models: 220 V – 240 V AC, 50/60 Hz
– Continued on next page –

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sony SA-WSF500 and is the answer not in the manual?

Sony SA-WSF500 Specifications

General IconGeneral
Speaker TypeSubwoofer
Frequency Response28-200 Hz
ConnectivityWired
Enclosure TypeBass Reflex
WirelessNo
Phase SwitchYes
Auto Power On/OffYes
TypeActive
Power Output100W
Driver Size200mm
InputsLine In
Crossover Frequency50-200 Hz
Weight11 kg

Summary

Servicing Notes

Repair Preparation

Steps to take before starting repair, including system connection.

Disassembly Procedures

Disassembly Flow

Step-by-step guide for disassembling the set in the correct order.

Diagrams and Schematics

System Block Diagrams

Functional block diagrams for DSP, AMP, and Power Supply sections.

Exploded Views

Electrical Parts List

Capacitors, Connectors, and Coils

Lists of capacitors, connectors, and coils with part numbers, specifications, and remarks.

Diodes, Transistors, and ICs

Lists of diodes, transistors, and integrated circuits with part numbers and specifications.

Related product manuals