8. Switch the lens or camera body to "MF" (manual focus), and adjust the focus
manually.
If photograph photographs come out with only part in focus
By narrowing down the camera aperture, you can shoot with the entire photograph in
focus with little blurring in the background or foreground.
Photograph with aperture opened (example: Aperture value of 2.8)
Photograph with aperture narrowed down (example: Aperture value of 16)
Try the following operations.
0. Turn the camera's mode dial to "A (Aperture Priority mode)".
This mode automatically sets the camera so variables other than aperture are at
optimum exposure.
1. Increase the F-value with the dial.
Increasing the aperture in dark locations reduces the amount of light received,
making it easier for camera shake to occur. In such cases, use a tripod or similar
mechanism to prevent camera shake.
If using ILCA-77M2, SLT-A77V, SLT-A99V, or DSLR-A900
If the photograph is not in focus with subjects and situations other than those noted
To Next Page
Loading...
