To Next PageTo Next Page
Need help?Do you have a question about the Sony SEL1224G and is the answer not in the manual?
General| Mount Type | Sony E-mount |
|---|---|
| Focal Length | 12-24mm |
| Maximum Aperture | f/2.8 |
| Minimum Aperture | f/22 |
| Minimum Focus Distance | 0.28 m (0.92 ft) |
| Image Sensor Format | Full-frame |
| Optical Stabilization | No |
| Maximum Magnification Ratio | 0.14x |
| Diaphragm Blades | 9 |
| Focus Type | Auto Focus |
| Angle of View | 122°-84° |
| Weight | 847g (29.9oz) |
| Lens Type | Zoom |
| Number of diaphragm blades | 9 |
| Optical Design | Aspherical lens, ED glass elements, Super ED glass element |
Details the technical specifications of the SEL1224G lens, including focal length, aperture, and dimensions.
Guidelines for safe handling and storage of volatile chemicals used in servicing.
Precautions for cleaning and handling exterior components of the lens.
Specific procedures and precautions for using unleaded solder during repairs.
Post-repair safety checks to ensure the product's operational integrity and user safety.
Procedure for backing up and writing adjustment data when replacing the main board.
General operational notes and precautions for handling flexible boards during disassembly and assembly.
List of specialized tools and their part numbers required for service operations.
Exploded view illustrating the internal components and assembly of the lens.
Detailed step-by-step procedures for disassembling the lens components.
Flowchart detailing the sequence for disassembling the lens components.
Exploded view of the front section of the lens, detailing components and their part numbers.
Exploded view of the lens mount section, detailing components and their part numbers.
Exploded view of the mirror tube section, detailing components and their part numbers.
Exploded view of the cam tube section, detailing components and their part numbers.
Guide to selecting specific parts based on thickness for adjustment purposes.
Preparation steps and considerations before beginning lens adjustment procedures.
Table indicating which components require adjustment after replacement.
Flowchart outlining the sequence for optical axis and resolving power checks and adjustments.
Comprehensive list of tools, software, and equipment required for lens servicing and adjustment.
Procedures for checking and adjusting the optical axis of the lens.
Procedures for checking the lens's resolving power.
Procedure for checking projective resolving power using a chart and projector.
Procedure for checking photographic resolving power using a camera and test chart.
Procedures for adjusting resolving power based on check results.
Adjustment procedure for correcting partial blur in the lens.
Comprehensive guide for performing E-Mount lens adjustments using specialized software.
Step-by-step guide for starting and finishing the E-Mount Lens Adjustment process.
Details the adjustment methods for specific lens parameters.
Procedure for adjusting lens device parameters including focus and zoom.
Procedure for adjusting the flange back of the lens.
Procedure for adjusting the F number (aperture) of the lens.
Procedure for checking ROM data and switch operations.
Procedure to verify if the lens adjustments have been successfully completed.
Procedure for setting the lens to sleep mode.
