SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
US Model
Canadian Model
AEP Model
Chinese Model
INTERCHANGEABLE LENS
© 2017.02
2017B33-1
9-896-808-11
Ver. 1.0 2017.02
SEL100F28GM
(FE 2.8/100 STF GM OSS) (FE 100mm F2.8 STF GM OSS)
SPECIFICATIONS
E-mount
Product name
(Model name)
FE 100mm F2.8 STF GM
OSS
(SEL100F28GM)
Focal length (mm)
100
35mm equivalent focal
length*¹ (mm)
150
Lens groups-elements
10-13 *²
Angle of view 1*³ 24°
Angle of view 2*³ 16°
Minimum focus* (m (feet))
With the macro switching
ring set to “0.85m-∞”
With the macro switching
ring set to “0.57m-1.0m”
0.85 (2.79)
0.57 (1.87)
Maximum magnification (X)
With the macro switching
ring set to “0.85m-∞”
With the macro switching
ring set to “0.57m-1.0m”
0.14
0.25
Minimum aperture F20 (T22)
Filter diameter (mm) 72
Dimensions (maximum
diameter × height)
(approx., mm (in.))
85.2 × 118.1
(3 3/8 × 4 3/4)
Mass (approx., g (oz)) 700 (24.7)
Shake compensation
function
Yes
*¹ This is the equivalent focal length in 35mm format
when mounted on an Interchangeable Lens Digital
Camera equipped with an APS-C sized image sensor.
*² The apodization element is not included.
*³
Angle of view 1 is the value for 35mm cameras, and
angle of view 2 is the value for Interchangeable Lens
Digital Cameras equipped with an APS-C sized image
sensor.
*4 Minimum focus is the distance from the image
sensor to the subject.
ˎ
Depending on the lens mechanism, the focal length
may change with any change in shooting distance.
The focal lengths given above assume the lens is
focused at infinity.
Included items
(The number in parentheses indicates the number
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood (1), Lens case (1), Set of printed
documentation
Design and specifications are subject to change
without notice.
and are trademarks of Sony Corporation.
To Next Page
Need help?
General
Weight and Dimensions
