Sony SEQ-H3800 - Section 1 Test Mode; Test Mode Activation and Control

SECTION 1
TEST MODE
[TEST MODE]
This
unit
turns
on
and
off
the
power
when
connected
to
the
pre-main
amplifier
(TA-H3800).
If
the
amplifier
is
not
connected,
it
will
remain
in
the
STANDBY
condition
even
when
ACIOOV
is
input.
When
the
test
mode
is
set,
the
following
tests
can
be
carried
out.
Setting the Test Mode
Test mode ON/OFF Press the DISPLAY button and
SLEEP button together.
1. EQCHECK ON/OFF Press the EO button
¢ EQ MAX Press the CURSOR A button.
®
EQ
FLAT
Press
the
CURSOR
<@
or
Bp
button.
¢ EQ MIN Press the CURSOR W button.
2. SUR CHECK ON/OFF Press the S-SUR button.
® SUR MAX Press the CURSOR A button.
¢ SUR OFF Press the CURSOR ® button.
3. FLCHECK ON/OFF Press the TIMER | button.
LED CHECK ON/OFF Press the TIMER 2 button.
5. KEY CHECK ON/OFF Press the REC TIMER button.
-
*
The
test
mode
can
be
set
when
power
is
supplied
only
for
SEQ-H3800
(all
connections
removed).
When
all
checks
of
check
mode
“FL
CHECK”,
“LED
CHECK”,
or
“KEY
CHECK”
have
been
completed,
the
unit
automatically
exits
the
check
mode.
As
the
EQ
and
SUR
effects
remain
even
after
the
unit
exits
the
“EQ
CHECK”
and
“SUR
CHECK”
check
modes,
press
the
FLAT
key
after
checking
the
effects
to
return
the
unit
to
its
original
state.
In
the
test
mode,
the
image
input
will
be
fixed
at
“VIDEO
1”
and
the
audio
input
at
“MD/DAT”.