model name [SHAKE-6D]
[4-462-817-11(2)] GB
39
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\080SND.fm]
masterpage:Right
Sound Adjustment
Setting/Canceling
Bluetooth standby
mode
The system goes into Bluetooth standby
mode and waits for a Bluetooth
connection, even when the system is
turned off.
1 Hold down SHIFT, then press
OPTIONS.
2 Press / repeatedly to select
“BT STANDBY”, then press .
3 Press / repeatedly to select
“ON” or “OFF”.
4 Press ?/1 to turn off the system.
When Bluetooth standby mode is set to
on, the system will turn on
automatically when you establish the
Bluetooth connection from the
Bluetooth device.
Note
The system will not enter Bluetooth standby
mode if you erase the pairing information.
Adjusting the sound
Creating your own
sound effect
You can raise or lower the levels of
specific frequency bands and then store
the setting in the memory as “USER EQ”.
1 Hold down SHIFT, then press
OPTIONS.
2 Press / repeatedly to select
“EQ EDIT”, then press .
Sound Adjustment
To Do this
Reinforce the
bass and create
a more powerful
sound
Press BASS BAZUCA on
the unit.
Reduce the bass
sound (BASS
CUT)
Hold down BASS
BAZUCA on the unit for
2 seconds or more.
To cancel the BASS CUT
effect, press BASS
BAZUCA again.
Notes
• The BASS BAZUCA
indicator flashes when
BASS CUT effect is
turned on.
• The BASS CUT effect is
turned off automatically
when you turn off the
system.
Select a preset
sound effect
Hold down SHIFT, then
press MUSIC, MOVIE/
GAME, or FOOTBALL.
To cancel preset sound
effect, hold down SHIFT,
then press MUSIC
repeatedly to select
“FLAT”.
To Next Page
Loading...
