Sony SHAKE-6D - Page 55

model name [SHAKE-6D]
[4-462-817-11(2)] GB
55
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\090INF.fm]
masterpage:Right
Additional Information
Bluetooth section
Communication system
Bluetooth Standard version 3.0 + EDR
(Enhanced Data Rate)
Output
Bluetooth Standard Power Class 2
Maximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible Bluetooth profiles
2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
2)
Bluetooth standard profiles indicate the
purpose of Bluetooth communication between
devices.
Speakers
Speaker system
3-way, Bass reflex
Speaker unit
Woofers: 200 mm, cone type
Tweeters: 25 mm, horn type
Subwoofers: 350 mm, cone type
Rated impedance
4ohms
Dimensions (w/h/d) (Approx.)
490 mm × 660 mm × 360 mm
Mass (Approx.)
26.5 kg
Quantity: 2 pieces
General
Power requirements
Russian model:
AC 220 V – 240 V, 50/60 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
Power consumption
370 W
Dimensions (w/h/d) (excl. speakers)
(Approx.)
505 mm × 160 mm × 350 mm
Mass (excl. speakers) (Approx.)
6.2 kg
Supplied accessories
Remote control (1)
R6 (Size AA) batteries (2)
FM lead/AM loop antenna (1)
Video cord (1)
Bottom panel (1)
Design and specifications are subject to
change without notice.