Sony SLV-678HF - Video Cassette Recorder User Manual

MODEL:
DESCRIPTION:
DIMENSIONS
(WHD):
WEIGHT:
SLV-688/678HF
DESCRIPTION:
DIMENSIONS
(WHD):
WEIGHT:
POWER
REQUIREMENTS:
POWER
CONSUMPTION:
1/4 inch =1 inch Scale 4:1
FRONT VIEW
SIDE VIEW
VHS HI-FI VCR
14" X 4 1/8" X 11
8 lbs. 2 oz.
120
V
60
H
25
Watts
11"
8 5/8"
3/4"
Sony Electronics Inc • Consumer Integrated Systems • Park Ridge, New Jersey 07656
Features and specifications subject to change without notice. • Non-metric weights and measurements are approximate.
BACK VIEW
AC
IN
CONTROL S IN
CABLE MOUSE
1/4"9 3/4"
4 1/8"
7/8"
3/4"
OU
IN
RF UNIT
3
4
VHF/UHF
L Audio R
VIDEO
LINE
IN
LINE
OUT
HI-FI Stereo
VHS
R
14"
1 7/8 1 7/8"1/4
NOTE:
WHERE THERE ARE CLOSE TOLERANCES INVOLVED IN CABINET BUILDING
OR APPLICATIONS WHICH REQUIRE A GREAT DEGREE OF PRECISION WE
RECOMMEND THAT THE PRODUCT ITSELF BE USED TO MAKE THE ACTUAL
MEASUREMENTS. SONY WILL NOT BE RESPONSIBLE FOR INACCURACIES
IN THE DESIGN OR MANUFACTURE OF ENCLOSURES .

Sony SLV-678HF - Video Cassette Recorder Specifications

General

Brand	Sony
Model	SLV-678HF - Video Cassette Recorder
Category	VCR
Language	English

Summary

Product Specifications

Model and Description

Identifies the product as Sony SLV-688/678HF VHS HI-FI VCR.

Physical Dimensions

Details the width, height, and depth of the VCR unit.

Weight

Specifies the operational weight of the VCR as 8 lbs. 2 oz.

Power Requirements and Consumption

Outlines the electrical power requirements (120V 60Hz) and consumption (25 Watts).

Product Views and Dimensions

Front View Details

Illustrates the front of the VCR, showing controls and key dimensions.

Side View Details

Depicts the side of the VCR, including its height and width measurements.

Back View Details

Shows the rear panel with input/output connectors and RF unit.

Important Notes and Disclaimers

Measurement Accuracy Recommendation

Advises using the product itself for precise measurements due to tolerances.

Manufacturer Responsibility Disclaimer

States Sony is not responsible for inaccuracies in enclosure design or manufacture.