EasyManuals Logo

Sony SRG-X120 Manual

Sony SRG-X120
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
©2013 Crestron Electronics, Inc.
15 Volvo Drive · Rockleigh, NJ 07647
800.237.2041 / 201.767.3400
http://application.market.com
For more information please contact our Crestron Application Market team at
applicationmarket@crestron.com. The information contained on this document is privileged
and confidential and for use by Crestron Authorized Dealers, CSP Members, A+ Partners
and Certified Integrated Partners only. Specifications subject to change without notice.
Manufacturer: Sony Imaging Products & Solutions Inc.
Model: BRC-X400/SRG-X series
Device Type: Camera
CONTACT SUPPORT:
COMPANY NAME:
Sony Imaging Products & Solutions Inc.
SUPPORT CONTACT:
Crestron driver support
EMAIL ADDRESS:
Crestron.driver@am.sony.com
NOTES:
GENERAL INFORMATION
SIMPLWINDOWS NAME:
Sony_BRC-X400_SRG-X_series
CATEGORY:
Camera
VERSION:
1.0
SUMMARY:
This module controls Sony BRCX400, SRG-X series cameras by way of VISCA over
IP protocol.
GENERAL NOTES:
Using the provided sample program, you will be able to control up to 2 cameras by
selecting the camera (either Camera1 or Camera2) in Camera selection menu in
[System] tab.
This program works with the following models of Sony network camera products.
- BRC-X400, SRG-X400, SRG-X120, BRC-X401, SRG-201M2, SRG-X402, SRG-
HD1M2
Prior to building and transferring the firmware into the Crestron Control System, be
sure to set up the correct IP addresses of the camera in IP-ID-04 and IP-ID-05
UDP/IP Communications in Slot-07 ofCentral Control Modules: DMPS3-4K-150Cin
the Program View of the SIMPL Windows project. Right click the UDP/IP
Communications object and then select Configure devices ... (F6), go into [IP Net
Address] tab and then put the correct camera IP address in the Default Address
fields (see below pictures).

Other manuals for Sony SRG-X120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SRG-X120 and is the answer not in the manual?

Sony SRG-X120 Specifications

General IconGeneral
TypeIP security camera
PTZ modesPreset point
PTZ controlYes
Placement supported-
Connectivity technologyWired
Form factorDome
Mounting typeCeiling/Pole
Product colorWhite
LED indicatorsLAN, Power
Pan range-170 - 170 °
Pan speed300 °/sec
White balanceAuto, Indoor, Manual, One push, Outdoor
Tilt angle range-20 - 90 °
Camera shutter speed1/1 - 1/10000 s
Minimum illumination1.6 lx
Sensor typeExmor
Number of sensors1
Optical sensor size1/2.5 \
FocusMotorized/Manual
Optical zoom12 x
Focal length range4.4 - 52.8 mm
Maximum aperture number3.7
Minimum aperture number2
Closest focusing distance0.08 m
LED typeIR
Bit rate controlConstant Bit Rate (CBR)/Variable Bit Rate (VBR)
Total megapixels8.5 MP
Gain control typeAuto/Manual
Maximum resolution3840 x 2160 pixels
Supported video modes720p, 1080i, 1080p, 2160p
Video compression formatsH.264, H.265
Voice codecsAAC
Audio output channels2 channels
Streaming methodMulticast
Supported network protocolsIPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP
DC output voltage12
Power source typeDC, PoE
Power consumption (typical)25.5 W
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Harmonized System (HS) code85258900
Weight and Dimensions IconWeight and Dimensions
Depth200.2 mm
Width158.4 mm
Height177.5 mm
Weight1800 g

Related product manuals