Do you have a question about the Sony SRG-X400 and is the answer not in the manual?
Type | IP security camera |
---|---|
PTZ modes | Digital PTZ |
PTZ control | Yes |
Placement supported | - |
Connectivity technology | Wired |
Form factor | Dome |
Mounting type | Ceiling/Pole |
Product color | White |
LED indicators | LAN, Power |
Pan range | -170 - 170 ° |
Pan speed | 300 °/sec |
White balance | Auto, Indoor, Manual, One push, Outdoor |
Tilt angle range | -20 - 90 ° |
Camera shutter speed | 1/1 - 1/10000 s |
Minimum illumination | 1.6 lx |
Sensor type | Exmor |
Number of sensors | 1 |
Optical sensor size | 1/2.5 \ |
Focus | Motorized/Manual |
Digital zoom | 40 x |
Focal length range | 4.4 - 88 mm |
Maximum aperture number | 3.8 |
Minimum aperture number | 2 |
Closest focusing distance | 0.08 m |
LED type | IR |
Bit rate control | Constant Bit Rate (CBR)/Variable Bit Rate (VBR) |
Total megapixels | 8.5 MP |
Gain control type | Auto/Manual |
Maximum resolution | 3840 x 2160 pixels |
Supported video modes | 720p, 1080i, 1080p, 2160p |
Video compression formats | H.264, H.265 |
Supported graphics resolutions | 640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160 |
Voice codecs | AAC |
Audio output channels | 2 channels |
Streaming method | Multicast |
Supported network protocols | IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP |
DC output voltage | 12 |
Power source type | DC, PoE |
Power consumption (typical) | 25.5 W |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Harmonized System (HS) code | 85258900 |
Depth | 200.2 mm |
---|---|
Width | 158.4 mm |
Height | 177.5 mm |
Weight | 1800 g |
Instructions on how to physically install the camera in various locations.
Guidance on connecting the camera to power and other devices.
Instructions for controlling the camera's pan and tilt movements.
Steps for achieving optimal focus on a subject.
How to save, recall, and clear camera settings using presets.
How to access, navigate, and cancel camera on-screen menus.
Settings for controlling and limiting pan and tilt movement ranges.
Settings for recalling stored camera positions and configurations.
Step-by-step guide to setting up the administrator menu.
Details the settings within the camera's system menu.
Steps to enable HTTP/RTSP for web browser access.
Required computer configurations for web browser access.
How to change the default administrator password.
Tab for managing preset camera positions.
Provides solutions for common camera problems.
Important points for safe operation and use of the camera.
Selects which camera to control with the remote.
Controls manual and automatic focus adjustments.
Displays or hides the on-screen menu.
Controls the camera's pan and tilt movements.
Stores and recalls camera settings to/from memory.
Resets pan/tilt position and controls zoom functionality.
Steps for ceiling-mounting the camera, including safety cautions.
Steps to attach ceiling brackets to the ceiling and camera.
Instructions for connecting cables to camera terminals.
Steps to connect the camera to AC power.
How to connect the camera using PoE+ power.
How to synchronize a single camera using an external signal.
Detailed instructions for camera pan and tilt movements.
Resolving pan-tilt errors indicated by lamps and screen messages.
How to operate the camera's zoom function.
Procedures for achieving optimal focus.
How to save current camera settings to presets.
How to retrieve saved camera settings.
How to delete stored camera settings.
How to access, navigate, and cancel camera on-screen menus.
How to return to the main menu.
How to exit or cancel menus.
Details of a selected setting menu.
Adjusts the camera's gain setting.
Sets the electronic shutter speed for exposure.
Adjusts the camera's iris (aperture) setting.
Controls the speed of automatic exposure adjustment.
Sets the fastest electronic shutter speed.
Sets the slowest electronic shutter speed.
Manually adjusts the red and blue gain for white balance.
Menu for Gamma correction settings.
Menu for visibility enhancement settings.
Selects the camera's zoom mode.
Selects the camera's focus mode.
Focus mode settings for specific camera models.
Settings for limiting pan and tilt movement ranges.
Configures HTTP/RTSP communication for web access.
Displays the camera's IP address, subnet mask, and default gateway.
How to access the camera via a web browser.
Steps to enable HTTP/RTSP for web access.
Required computer configurations for web browser access.
How to change the default administrator password.
Interface for controlling camera pan/tilt, zoom, and focus.
Displays and manages stored preset camera positions.
Overview of how to use the administrator menu.
Step-by-step guide to setting up the administrator menu.
Details the settings within the camera's system menu.
Menu for setting camera image parameters.
Menu for setting camera audio functions.
Menu for configuring network settings.
Menu for setting user access and security.
Menu for pan, tilt, zoom, focus, and serial communication settings.
Menu for configuring video streaming settings.
Configures the camera's date, time, and time zone.
Selects the video output format for HDMI/SDI.
Options for rebooting and resetting the camera.
Exports or imports camera settings via files.
Imports camera settings from a file.
Upgrades the camera's firmware.
Configures image settings like exposure, color, and detail.
Selects exposure mode (Auto, Manual, Shutter/Iris Priority).
Enables visibility enhancement and adjusts shadow brightness.
Adjusts the camera's iris (aperture) and gain settings.
Sets the maximum gain for automatic exposure.
Sets the electronic shutter speed for exposure.
Sets the fastest and slowest electronic shutter speeds.
Selects the white balance mode.
Manually adjusts the red and blue gain for white balance.
Selects detail/sharpness mode and adjusts contour correction level.
Selects the type of gamma correction curve.
Configures video codec settings for streaming.
Settings for each image stream (codec, size, frame rate).
Configures audio input and output settings.
Tab for network configuration settings.
Configures IPv4 network settings.
Common network settings for IPv4 and IPv6.
Manages administrator and user accounts and permissions.
Tab for setting up user accounts.
Selects the behavior for preset recall.
Lists error messages and their solutions.
Provides solutions for common camera problems.