Sony SRS-XB30 User Manual

Help Guide
Wireless Speaker
SRS-XB30
Disconnecting the NFC-compatible device by One-touch (NFC)
You can disconnect the speaker from the connected NFC-compatible device such as a smartphone or Walkman, etc. by touching
the speaker with it.
Hint
After the speaker is disconnected from the device by One-touch, if no operation is performed and no sound is input for 15 minutes, the speaker
turns off automatically by the auto power off function.
If you cannot disconnect the speaker, try the following.
Start the app on the device, and move the device slowly over the N marked part of the speaker.
If the device is in a case, remove the case.
Make sure that the app screen is displayed on the device.
When using the Speaker Add function or Wireless Party Chain function, touch the speaker where the
(BLUETOOTH) indicator lights up. The
device cannot be disconnected if touching the speaker where the
(BLUETOOTH) indicator turns off.
4-694-130-11(2) Copyright 2017 Sony Corporation
Touch the device on the N marked part of the speaker.
1
25

Sony SRS-XB30 Specifications

General

Number of drivers	-
Number of speakers	1
Audio output channels	- channels
Battery type	Built-in
Power source type	AC, Battery
Battery life (max)	24 h
Power consumption (standby)	0.5 W
RMS rated power	20 W
Bluetooth range	10 m
Frequency range	2.4 GHz
USB charging port	Yes
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Red
Cables included	AC

Weight and Dimensions

Depth	86.1 mm
Width	228.1 mm
Height	82 mm
Weight	980 g