To Next PageTo Next PageHow to troubleshoot no sound from a specific component on Sony SS-MSP2 Home Theater System?
If there's no sound from a specific component on your Sony Home Theater System, verify that the component is correctly connected to the audio input jacks. Ensure the cords are fully inserted into the jacks on both the receiver and the component. Finally, confirm that you have selected the correct component on the receiver.
What to do if one front speaker has no sound on Sony SS-MSP2 Home Theater System?
If there is no sound from one of the front speakers of your Sony Home Theater System, connect a pair of headphones to the PHONES jack to verify if sound is output from the headphones. If only one channel is output from the headphones, check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channels are output from the headphones, check the connection of the front speaker which is not outputting any sound.
Why is there no sound from center or surround speaker on Sony Home Theater System?
If there's no sound or very low sound from the center or surround speaker on your Sony Home Theater System, ensure the sound field function is activated by pressing MOVIE or MUSIC. You can also select a sound field containing “C.ST.EX”. Adjust the speaker level and make sure the center or surround speaker size parameter is set to either “SMALL” or “LARGE”.
Why Dolby Digital or DTS multi channel sound is not reproduced on Sony SS-MSP2?
If Dolby Digital or DTS multi-channel sound isn't being reproduced on your Sony Home Theater System, first check that the DVD or other media being played is recorded in Dolby Digital or DTS format. When connecting a DVD player to the digital input jacks, verify the audio settings (audio output settings) of the connected component.
How to fix unbalanced sound on Sony SS-MSP2 Home Theater System?
If the left and right sounds are unbalanced or reversed on your Sony Home Theater System, check that the speakers and components are connected correctly and securely. You can also adjust the balance parameters in the LEVEL menu.
Why is there no sound from the Sony Home Theater System subwoofer?
If there's no sound from the active subwoofer on your Sony Home Theater System, check that the subwoofer is connected correctly and securely.
How to enable surround sound effect on Sony Home Theater System?
If you're not getting a surround effect with your Sony Home Theater System, make sure the sound field function is turned on by pressing MOVIE or MUSIC.
Why is my Sony SS-MSP2 Home Theater System remote not working?
If the Sony Home Theater System remote isn't working, ensure you're pointing it at the remote sensor on the receiver and that there are no obstacles in the way. Check that the command mode of the remote corresponds to that of the receiver. If you intend to use the V/v/B/b buttons for receiver operation, first press MAIN MENU on the remote. For buttons with orange printing, press ALT before pressing them. Also, try replacing the batteries with new ones and ensure the correct input selector is chosen on the remote. If the remote is set to operate the TV only, select a different source before operating the receiver.
How to fix severe hum or noise in Sony SS-MSP2?
General| Brand | Sony |
|---|---|
| Model | SS-MSP2 |
| Category | Home Theater System |
| Language | English |
