Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Turning on the receiver
Before connecting the AC power cord (mains lead), be sure to make connections for speakers and the other devices.
5-037-021-11(1) Copyright 2022 Sony Corporation
Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver firmly.
AC power cord (mains lead) (supplied)
AC IN terminal
1
Space remains between the plug and the rear panel even when the power cord (mains lead) is inserted firmly. The cord is supposed be connected this way. This is not malfunction.
*
Connect the AC power cord (mains lead) to a wall outlet.
[HELLO] appears on the display panel and then switches to [PLEASE WAIT].
You cannot turn on the receiver until the [PLEASE WAIT] display disappears.
2
Turn on the TV, and then switch the input of the TV to which the receiver is connected.
3
Press
(power) to turn on the receiver.
4
To Next Page