Sony STR-AZ3000ES

To Next Page

To Previous Page

Help Guide

Multi Channel AV Receiver

STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES

Enjoying video and sound on the amplifier and TV in Zone 2

You can enjoy video and sound from the receiver in Zone 2 by the following procedure.

Hint

You can also activate Zone 2 by pressing ZONE 2 on the receiver.

You can also select source signals while displaying [ZONE2 INPUT XXXX (input name)] on the display panel by pressing ZONE CONTROL on the receiver repeatedly.

When [HDMI OUT B Mode] in [HDMI Settings] is set to [Zone2], the video signals that can be played are limited depending on the input as follows:

HDMI IN 1, 2, 3 and 4 jacks:

up to 4K/60p 4:4:4

HDMI IN 5, 6 jacks and HDMI IN 7 jack (STR-AZ7000ES/STR-AZ5000ES only):

up to 4K/60p 4:2:0

The only inputs from the HDMI IN jacks can be played back in Zone 2. When [SOURCE] is selected for the input, the video and sound from the HDMI IN jack currently selected in the main zone will be

played back.

To exit Zone 2 function

Press ZONE 2

(power) on the remote control to turn off the Zone 2 power.

To exit Zone 2 operation

Select [Zone Controls] - [Zone2] - [Power] from the home menu, then select [Off].

Available inputs and functional restrictions in Zone 2

See “Available input sources for each zone.”

Hint

A dedicated App for this model Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your smartphone or tablet.