Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Saving power during standby mode
You can save power by setting up the receiver as follows:
Set [Audio Return Channel], [Control for HDMI] and [Standby Through] in the [HDMI Settings] menu to [Off].
Set [Network/Bluetooth Standby] in the [System Settings] menu to [Off].
Set [Power] of [Zone2] or [Zone3] in the [Zone Controls] menu to [Off].
Related Topic
Controlling HDMI devices (Control for HDMI)
Enjoying content of a connected device without turning on the receiver (Standby Through)
Enjoying sound using another amplifier in Zone 3
5-037-021-11(1) Copyright 2022 Sony Corporation
To Next Page