Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Selecting the Auto Calibration type (Calibration Type)
You can select a calibration type after you have performed the Auto Calibration and saved the settings.
Note
This function does not work when [Direct] is being used and an analog input is selected.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Auto Calibration Settings].
2
Select [Calibration Type].
3
Select the setting you want.
Full Flat: Makes the measurement of frequency from each speaker flat.
Engineer: Sets to “the Sony listening room standard” frequency characteristics.
Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Off
4
To Next Page
Loading...
