Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Setting the crossover frequency of the speakers (Crossover Frequency)
You can set the bass crossover frequency of speakers for which [Manual Speaker Settings] - [Size] has been set to [Small] in the [Speaker Settings] menu. A measured speaker
crossover frequency is set for each speaker after the Auto Calibration is performed.
Note
The surround back speakers will be set to the same setting as that of the surround speakers.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
Select [Crossover Frequency].
3
Select the speaker for which you want to adjust the crossover frequency on the screen.
4
Set the crossover frequency of the selected speaker.
5
To Next Page