Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Upscaling video signals to 4K/8K (4K/8K Upscaling)
You can up-convert video signals to 4K/8K and output them through the HDMI OUT jack of the receiver.
Note
This function works only when video signals from HDMI IN jacks are being received. HDMI video input signals must be 1920x1080p 24/50/60 Hz 2D or 3840x2160p 24/50/60 Hz.
When [HDMI OUT B Mode] is set to [Zone2], the HDMI OUT B (ZONE 2) jack does not support [4K/8K Upscaling].
This function does not work when the input signal is a compressed video signal, VRR signal or Dolby Vision signal.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [4K/8K Upscaling].
2
Select the setting you want.
Auto: Enables video scaling control of 4K/8K HDMI output automatically if you connect a 4K/8K-compatible TV.
Off
3
To Next Page
Loading...
