Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Enabling the direct playback of DSD signals (DSD Native)
You can set the unit to process DSD (Direct Streaming Digital) signals directly without any signal conversion to PCM signals and derive intrinsic sound quality of DSD signals.
Note
This function does not work in the following cases:
[Bluetooth Mode] is set to [Transmitter].
When [DSD Native] is set to [On] and DSD signals are being played back, the settings of [Equalizer] and [Subwoofer Low Pass Filter], etc., are invalid, and the sound field does not work.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Audio Settings] from the home menu.
1
Select [DSD Native].
2
Select the setting you want.
On: This function is available for DSD signals.
Off: DSD signals are converted to PCM signals and played back.
3
To Next Page