Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Setting the receiver to switch to standby mode automatically (Auto Standby)
You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when no signals are input to the receiver.
Note
This function does not work in the following cases:
[FM TUNER] is selected as the input.
The software of the receiver is being updated.
BLUETOOTH receiver (headphones/speakers) are connected.
[DSD Native] is set to [On] and DSD signals are being played back.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Standby].
2
Select [On] or [Off].
When you select [On], the receiver switches to standby mode automatically in about 20 minutes if there is no operation.
3
To Next Page
Loading...
