Sony STR-AZ3000ES - Page 52

8
EN
Table of Contents
Map of GUI menu system ................................................................................................2
Using the home menu
......................................................................................2
Preparations
Preparing the receiver ......................................................................................................9
Outline dimensional drawing
...........................................................................9
Attaching/removing the front cover
................................................................9
Mounting the receiver using the rack mount kit
........................................................... 10
Connections
Making a multi-zone connection .................................................................................... 11
Speaker patterns and terminals to be connected (for STR-AZ7000ES)
.........................12
Speaker patterns and terminals to be connected (for STR-AZ5000ES)
........................26
Speaker patterns and terminals to be connected (for STR-AZ3000ES)
........................ 32
Settings
Setting up the receiver ...................................................................................................36
Activating the network standby mode
..........................................................36
Turning on the control mode to make an external controller connection
.... 36
Outputting a test tone from each speaker (TestTone)
..................................36
Displaying a test screen (Test Picture)
........................................................... 37
Adjusting the sound balance automatically (Auto Calibration)
.................... 37
List of messages after Auto Calibration measurements
............................... 37
Saving/loading settings of the receiver
........................................................ 38
Setting the in-ceiling speaker mode
.............................................................. 38
Updating the software via the network
.........................................................39
Updating the software with a USB flash drive
...............................................39
Using the PING button
................................................................................... 39
Using the hidden commands
Performing commands using the receiver ....................................................................40
Performing commands using the supplied remote control
.........................................40
Changing the remote control code
...............................................................40
Turning on transmitting mode of the discrete code for the main zone
........ 41
Turning on transmitting mode of the discrete code for Zone 2/Zone 3
......42
Useful information
Zone distribution ............................................................................................................ 44