Sony STR-AZ3000ES - Speaker Patterns and Terminals (STR-AZ3000 ES)

32
EN
Speaker patterns and terminals to be connected (for STR-AZ3000ES)
When you connect speakers to the receiver, refer to the following table.
You can use the following table to confirm the speaker patterns supported by the receiver as
well as the speaker terminals to which the speakers of each speaker pattern are to be
connected.
To set the speaker pattern, select [Setup] - [Speaker Settings] - [Manual Speaker Settings] -
[Speaker Pattern] from the home menu.
The abbreviations and symbol used in the list are as follows.
FH: Front high speakers
TF: Top front speakers
TM: Top middle speakers
TR: Top rear speakers
RH: Rear high speakers
FD: Front Dolby Atmos enabled speakers
SRD: Surround Dolby Atmos enabled speakers
SB: SPEAKERS SURROUND BACK (HEIGHT 2/
FRONT B/BI-AMP/ZONE 2) terminals
What the numbers in the speaker pattern indicate:
7 . 1 . 4
Number of speakers
located at listener’s
level
Number of
subwoofers
Number of height or
overhead (top) speakers
Speaker pattern
SPEAKERS terminals
PRE OUT
SUBWOOFER
jacks
S-CENTER
OUT jack
Zone 2
connection
Front B
speaker
connection/
Bi-amplifier
connection
FRONT A CENTER SURROUND
SURROUND BACK
(HEIGHT 2/FRONT B/
BI-AMP/ZONE 2)
HEIGHT 1
(ZONE 2)
2.0

- - - - - -
SB or HEIGHT1
SB
2.0.2 (TM)

- - -
 (TM)
- - SB SB
2.0.2 (FD)

- - -
 (FD)
- - SB SB
2.1

- - - -

-
SB or HEIGHT1
SB
2.1.2 (TM)

- - -
 (TM) 
- SB SB
2.1.2 (FD)

- - -
 (FD) 
- SB SB
3.0
 
- - - - -
SB or HEIGHT1
SB
3.0

- - - - -

SB SB
3.0
 
- - - -

SB SB
3.0.2 (TM)
 
- -
 (TM)
- - SB SB
3.0.2 (TM)

- -
 (TM)
- -

Zone 2 output
only
Not available
3.0.2 (TM)
 
-
 (TM)
- -

Zone 2 output
only
Not available
3.0.2 (FD)
 
- -
 (FD)
- - SB SB
3.0.2 (FD)

- -
 (FD)
- -

Zone 2 output
only
Not available
3.0.2 (FD)
 
-
 (FD)
- -

Zone 2 output
only
Not available
3.1
 
- - -

-
SB or HEIGHT1
SB
3.1

- - - -
 
SB SB
3.1
 
- - -
 
SB SB
3.1.2 (TM)
 
- -
 (TM) 
- SB SB
3.1.2 (TM)

- -
 (TM)
-
 
Zone 2 output
only
Not available
3.1.2 (TM)
 
-
 (TM)
-
 
Zone 2 output
only
Not available
3.1.2 (FD)
 
- -
 (FD) 
- SB SB
3.1.2 (FD)

- -

(FD)
-
 
Zone 2 output
only
Not available
3.1.2 (FD)
 
-
 (FD)
-
 
Zone 2 output
only
Not available
4.0

-

- - - -
SB or HEIGHT1
SB
4.0.2 (FH)

-

-
 (FH)
- - SB SB