44
EN
Useful information
Zone distribution
The receiver can deliver input signals for each video or audio input to another zone in
combinations such as the following.
Zone distribution capability (video)
Video input Main zone
HDMI OUT A
Main zone
HDMI OUT B
(ZONE 2)
1)
Zone 2
HDMI OUT B
(ZONE 2)
2)
Main zone
VIDEO OUT
MONITOR
Zone 2
VIDEO OUT ZONE 2
VIDEO IN jacks (composite)
– – –
HDMI IN jacks
3)
4)
– –
1)
When [HDMI OUT B Mode] in the [HDMI Settings] menu is set to [Main].
2)
When [HDMI OUT B Mode] in the [HDMI Settings] menu is set to [Zone2].
3)
HDMI IN 1, 2, 3, and 4 jacks support video signals of 8K or up to 4K/120p.
HDMI IN 5 and 6 jacks, and HDMI IN 7 (VIDEO) jack (STR-AZ7000ES/STR-AZ5000ES only) support video
signals up to 4K/60p 4:4:4.
4)
The video signals that can be played in Zone 2 are limited depending on the HDMI input as follows:
– HDMI IN 1, 2, 3, and 4 jacks:
up to 4K/60p 4:4:4
– HDMI IN 5 and 6 jacks, and HDMI IN 7 (VIDEO) jack (STR-AZ7000ES/STR-AZ5000ES only):
up to 4K/60p 4:2:0
Zone distribution capability (audio)
Input source/
Output
Main zone
HDMI OUT A
Main zone
HDMI OUT B
(ZONE 2)
Zone 2
HDMI OUT B
(ZONE 2)
Main zone
SPEAKERS
terminals
Zone 2
SPEAKERS
terminals
Zone 2
AUDIO OUT
(VARIABLE)
Zone 3
AUDIO OUT
(VARIABLE)
PRE OUT
AUDIO IN jacks
– –
Built-in Tuner
1)
– –
DIGITAL
OPTICAL IN
jacks
– –
2)
2)
2)
–
DIGITAL
COAXIAL IN
(SA-CD/CD) jack
– –
2)
2)
2)
–
HDMI IN jacks
3)
3)
–
HDMI OUT A
jack
(eARC/ARC)
– – – – – –
1)
When [FM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most
recently selected will be set.
2)
Digital audio stream is not supported for distributing signals such as Dolby Digital and DTS. The Digital
Audio output setting should be “2ch PCM” on the player device.
3)
Zone 2 speaker out and Zone 2 audio out only support 2-channel audio output. Multi-channel stream
signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same
source signals as the main zone are selected in Zone 2.
To Next Page