68
GB
EQ
BASS: 99 Hz~1.0 kHz
MID (FRONT L/R, CENTER only):
198 Hz~10 kHz
TREBLE: 1.0 kHz~10 kHz
Gain levels: ±10 dB, 0.5 dB step
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo:
38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range 531 – 1,602 kHz
Antenna Loop antenna
Usable sensitivity 50 dB/m (at 999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m,
400 Hz)
Selectivity 35 dB
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
General
Power requirements
Area code Power requirements
CEL 230 V AC, 50/60 Hz
TW 110 V AC, 60 Hz
KR 220 V AC, 60 Hz
Power consumption
Area code Power consumption
CEL, KR 390 W
TW 400 W (max. 1,000 W)
Power consumption (during standby mode)
1 W
AC outlets
Area code AC outlets
CEL 1 switched, 100 W
TW 2 switched, 100 W
Dimensions 430 × 174 × 465 mm
including projecting parts
and controls
Mass (Approx.) 21 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-LP211 (1)
R6 (size-AA) batteries (3)
For details on the area code of the component you
are using, see page 2.
Design and specifications are subject to change
without notice.
Specifications (continued)
To Next Page
Loading...
