Sony SWF-BR100 Service Manual

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SWF-BR100
WIRELESS SUBWOOFER
9-893-941-02
2014D33-1
©
2014.04
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Chinese Model
Mexican Model
Chilean Model
New Zealand Model
Hong Kong Model
Taiwan Model
Ver. 1.1 2014.04
• All of the units included in the SWF-BR100 (wire-
less transceiver: UWT-BR100, Audio cable), and
the TV corresponding to SWF-BR100 are required
to confi rming operation of SWF-BR100.
Check in advance that you have all of the units.
Refer to the operating instructions of the SWF-
BR100 or operating instructions of the TV corre-
sponding to SWF-BR100 for the operation method.
SPECIFICATIONS
Wireless Subwoofer
(SWF-BR100)
Amplier section
For U.S.A model:
(FTC)
With 4 ohms load, subwoofer
channel driven, from 30 - 150 Hz;
rated 45 W per channel minimum
RMS power, with no more than 1%
total harmonic distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
100 W (per channel at 4 ohms,
100 Hz)
For except US model:
POWER OUTPUT (rated)
70 W (4 ohms, 100 Hz, 1% THD)
(Except Chinese model)
70 W (4 ohms, 100 Hz)
(Chinese model)
POWER OUTPUT (reference)
100 W (4 ohms, 100 Hz)
(Except Chinese model)
Speaker System
Subwoofer, sealed enclosure
Speaker Unit
200 mm cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
(US, Canadian and Mexican models)
220V - 240V AC, 50/60 Hz
(UK and Hong Kong models)
240V AC, 50/60 Hz
(Australian and New Zealand models)
220V AC, 50/60 Hz (Chinese model)
110V AC, 50/60 Hz (Taiwan model)
120V - 240V AC, 50/60 Hz (other models)
Power consumption
On: 30W
Standby mode: 0.5W or less
Dimensions (approx.) (w/h/d)
272 mm x 306 mm x 395 mm
10 3/4 in x 12 1/8 in x 15 5/8 in
Mass (approx.)
12.2kg
26 lb 14 3/10 oz
Wireless Transceiver
(UWT-BR100)
Communication system
Wireless Sound Specication
version 3.0
Frequency band
5GHz band
(5.180/5.200/5.210/5.240GHz,
5.736/5.762/5.814GHz)
The frequency bands to use are
dierent by country.
Modulation method
DSSS
Power requirement
5V DC
Power consumption
500 mA
Dimensions (approx.)
19 mm x 27 mm x 91 mm
3/4 in x 1 1/8 in x 3 5/8 in
(w/h/d)
Mass (approx.)
25g
7/8oz
Supplied accessories
Audio cable (1)
Design and specications are
subject to change without notice.

Sony SWF-BR100 Specifications

General

Product color	White
Impedance	4 Ω
Subwoofer type	Active subwoofer
Wireless subwoofer	Yes
Subwoofer frequency range	- Hz
AC input voltage	120 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W

Weight and Dimensions

Subwoofer depth	395 mm
Subwoofer width	272 mm
Subwoofer height	306 mm
Subwoofer weight	12200 g